Recent content by vintage steel
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
V
the OV was caused be me doing the mod wrong and mistakenly earthing pin 13 :mad: I:rolleyes:
-
V
Yes I did think that. The wires are still there just disconnected, so if it happens again I'l cut the wire and reconnect the mod
-
V
When I added the wiring mod I did not remove the existing connections, think having it in parallel was no problem, however appears I had crossed the wires hence the zero ohms. Mod removed and all fine. No fault codes or warning lights Yahoo:D I think the initial problem may have just been a...
-
V
OK, thanks for now, you're given me some really good pointers
-
V
ok thanks, thought you meant pin 9 not 6:) all pins 1,5,10 and 13 are now 5.5 ohms and the ground fault cleared. Think the issue is around the switches as between the option B (new) wire and grd is zero ohms, brake pedal pressed or released. Think i need to get the switched out again :(. will...
-
V
Just looked again at the Option B mod I carried out and it looks like I wired the new wire from the switches to pin 13 on the connector not pin 9. I've remade the connection to pin 9, cleared the faults and the Front right outlet valve short to ground has gone. Which seems to make sense as the...
-
V
wow thanks, a wealth of knowledge! Am i correct to assume the connector detail is as looking on the end of the wired plug, so reversed on the modulator. If so pin 13 is o/c . however pin 6 to grd is 0 ohm pedal pressed or released
-
V
im handy with electrical circuits and have multimeter but do not have RAVE
-
V
I have 2 fault codes on the ABS that i cant clear and need some guidance on.
1) Front right outlet valve short to ground
2)Shuttle valve switch electrical failure
I haven't yet looked at the front right issue, but would it be correct to start to look around the ABS wheel sensor on the hub as...
-
V
new to forum but 2nd discovery ive had, first was a disco 1 MPI:( many years ago, just bought a 1999 TD5 disco 2 as a local run around. Currently working my way through all the know faults:mad: