Recent content by v8james

Thanks for your help, but acctuator was moving just not enough and not always.

Turns out the waste gate acctuator was sticking sorted now. Strange how you get a couple of electronic issues and you forget the problem could be mechanical.

If the MAF was disconnected i.e. ECU seeing 0 air flow, would this cause overboosting/kangarooing?

Only fault code 3014 air flow low fault

This wiring mod https://www.landyzone.co.uk/land-rover/td5-maf.255153/ connects pin 11 on red plug to pin 12 on black one, but it was doing it before this mod. Sorry don't have a Nanocom only Hawkeye.

Will make sure, but blew through all the small hoses and connectors with compressor.

Wastegate is working ok, also tested it with compressor. MAF sensor is disconnected and wiring mod done. Will check ambient pressure reading tonight but went for a test run last night with MAF removed (in case there was a restriction in the airbox) and still kangarooed.

Yes all pipes ok.

New modulator installed still missing. All pipes ok. Connected pipe from turbo outlet to acctuator, still missing. Only fault code 3014 air flow low fault. Boost pressure still showing as dropping back to 100 for an instant then back to normal. Is there a way of testing the map sensor and wiring?

Fuse 2 ok have ordered a new wastegate modulator.

So engine was running fine but now is kangarooing/missing under acceleration over 3k revs. The live data in Hawkeye has the MAP reading climbing with acceleration then suddenly drops to 100 engine misses for a second and then back to normal pressure and then repeats. Is this a broken MAP sensor??

New BCU fitted and programmed all working as it should :) If anyone needs a working IDM I have a working spare.

So swapped the IDM still got wipers going and no front electric Windows :( What is the procedure for changing the BCU?

Thanks, was thinking the same.

If I unplug the connector from the stalk the wipers stop at the parked position but I can still here the relay clicking, the delay selector still works until I unplug the small connector on the top of the steering column ten it goes to max length between wipes. Checked and cleaned earths at...