Recent content by Ulsterspud

Sorry meant to say, height sensor on that side was replaced last year

Folks any thoughts? Discovery 2 (2004), rear offside airsock has inflated to full height and won't go back down. I disconnected the plugs beside the compressor and it went back down, but after 10 mins driving goes back up . I've checked and there's no water on the blow off breather filter . Any...

Solved it! ****ed me off no end, so took door apart and looked at mechanism with a mirror, there is a 4mm hex bolt that sets the ammount of play in the door mechanism. You can actually reach this without taking the frigging door apart! If you flick the lever across in the lock as if it is...

Cheers! will get on it.

I'm replaceing DMF and clutch etc... should I replace rear crank seal whilst I'm in there? Cheers for any pointers.

thanks Guys for the pointers! Breaks A1 again

....will keep that in mind when dealing with sticky buggers thanks

Anybody any hints on back doors? Disco 2: both back doors are hard to open, the handle goes its full travel easily, but then you have to yank them to open the doors, the electrics are all working fine, and I have taken the door cards off and lubricated everything. Is there a way of reducing the...

Checked all those things.. nipples up etc... I haven't adjusted the nut on the rod from the servo yet (jamesmartin) is it a case of trial and error or is there a way of checking adjustment? Cheers

Cheers guys will check both

Having a mare with the breaks on D2 td5. Started when I put on new rear callipers, discs and flexible hoses, pedal goes to the floor with engine off and on. There is servo assistance and pressure can be pumped up with 2-3 pumps. I thought it was the master cylinder as it felt like...