Recent content by trevthegate
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
T
Being doing a bit of digging around about this lumpy tick over on the FL2 and many things seem to suggest the EGR valve could be the problem, possibly need cleaning ?, do you know if it is easy to remove as it is at the back of the engine and doesnt look accessable.
-
T
Will check when the fuel fiter was fitted, not my fl so dont keep track of service and things, how would you "monitor" the readings is that a dealer task ?
-
T
if you start up (hot or cold) you get a lumpy tickover @750-800 rpm if you raise the rpm to above 1000 rpm the lumpyness seames to disapear.
-
T
yes, no error code present at the time of testing
-
T
First of all I am new to Forum conversationso hope this is ok,as i placed this in the wrong section earlier.
Hi my 2007 freelander 2 suddenly developed a very lumpy tick over from @750-1000 rmp have had injector cleaner in , had all 4 injectors out and tested -ok, not sure what best to go for...
-
T
I would also hope he's fixed it, from the post date. but some else trying to find an answer to the same problem, that, might of only occurred this year (like mine)
-
T
Hi the best way is through the wheel arch ,remove the plastic cover in the wheel arch , and if you can use a 3/8 ratchet socket set instead of 1/2 kit,as this gives a bigger working space, just be sure things a clean before re-assy