Recent content by trevauk

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. T

    Side lights Shorting Out?

    It is only the front and rear passenger side sidelights that are blowing. The fuse blows as soon as the light switch is turned on. All other lights function as they should. My problem is that I am crap at electrics. When you say "trace it through" - from where to where and what!!!
  2. T

    Side lights Shorting Out?

    Hi All The passenger side sight lights, front and back seem to have started shorting out on my 1988 RRC 3.5 EFi . I have changed the fuse three times, the last time uprating it to a 20. Each time I switch the lights on the fuse blows. The rear brake light functions normally, but both front...
  3. T

    Correct tyre pressure

    Thanks Chris, I'll give that a try. Treva.
  4. T

    Correct tyre pressure

    Hi All I have just had 225/75 R16 fitted on my '88 RRC. Could someone please tell what the correct tyre pressure should be for on-road use? Thanks. Treva
  5. T

    Gemini 3003 Alarm

    Thats obviously why then they have not responded. I take it that this is a fairly dated system. I have searched the net and found nothing on it at all!!
  6. T

    Gemini 3003 Alarm

    Hi Nick I have tried the Gemini website and e-mailed their customer services but no luck. All the wires from the window switches go to the 2243 module and then under the centre console. The only way I know the 3003 alarm is there is by the siren speaker under the bonnet. Whereabouts are...
  7. T

    Gemini 3003 Alarm

    Hi All, My RRC has a Gemini 3003 alarm system fitted along with the Gemini 2243 Window Closing Module. Does anyone know where I can get hold of the manuals for each of these? When I bought the Rangie back in October last year the previous owner did not have any remotes and did not use the...
  8. T

    Possible gearbox problems 1988 RRC

    Hi All I have a 1988 3.5 EFI Auto RRC. This morning I went to put the Rangie into reverse and nothing happened, then back into drive and again nothing, just free revs. I switched off and re-started and bingo all was well. This also happened a couple of weeks ago. That time as well, switching...
Back
Top