tottot's latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  • tottot
    tottot reacted to Anaconda's post in the thread Leak from underneath defender 90 with Like Like.
    You never know with a previous owner, besides I have had blue oil before. I linked the output seal as someone else had suggested the possibility, does look a possibility by one of the pictures.
  • tottot
    tottot reacted to marjon's post in the thread Leak from underneath defender 90 with Like Like.
    They look like this bulge in the middle of the front and rear axles. I changed my oils months ago ;), but it doesn’t make a puddle. To believe your gearbox and transfer box has been out recently to blame it on an “overfill “ is a bit of a...
  • tottot
    tottot replied to the thread Leak from underneath defender 90.
    When it comes to fix its this is a basic job. A prop shaft bolt removal tool and other basic spanners and socket set will be needed Prop bolt tool is a thin neck socket available on ebay/amazon. A kit of parts including a new drive flange can be...
  • tottot
    Land Rover missed the boat when they stopped the Challenger Project circa 1991. A more comfortable but still a utility vehicle for civilian and military that had its prototype's based on the Discovery one. 100" wheelbase and a LWB of 114". There...
  • tottot
    tottot replied to the thread Leak from underneath defender 90.
    Classic sign of front output seal fail I would say. Oil flung by the drive flange is blown back on to where it can be seen. This has been happening a fair old time, evidence by the clean strip on the casing. Check transfer oil level straight...
  • tottot
    tottot reacted to baldygit's post in the thread Melting Earth Wire with Like Like.
    Well, fitted earth cable from block to battery at the weekend and so far all seems well. Many thanks for everyone's advice
  • tottot
    tottot reacted to Forrest Gump's post in the thread Fuel Filter Assembly Bolts with Like Like.
    See ya in two weeks then🔧
  • tottot
    tottot replied to the thread Fuel Filter Assembly Bolts.
    Why Land Rover put the filter there on TD5's right in the crud I can't think. Some have fitted replacements in better positions. Don't know myself but could it be placed on the inside of the chassis leg?
  • tottot
    Boat anchor I recon.
  • tottot
    Someone I knew had some made from some metal car ramps. Flipped over one drove into them and a length of chain over the bumper held in place. Still could be used as ramps.
Back
Top