Recent content by tobyd

Cheers I'll give it a try - all my bolts are imperial!!

Hi, I have fitted a 110 side frame to my 69 Station Wagon. There are a few differences and one is that the fastening to the cross piece that forms the back of the seat box are threaded holes in the B post. Could anyone tell me the size or part number of the 4 bolts needed (see pic)? Thanks...

Hi, I'm restoring a 109SW 2a with a 3 litre P5 6 cyl fitted. The rocker cover has the rocker cover breather at the bulkhead end. If you look past the old wiring you will see that at the bulkhead end of the rocker cover is the hole covered by tape and an old rubber glove. This is for an engine...

I know not the same but I have smart roadster seats in my s1. Thin base and tall seat with integrated heat restraint. Bit of side bolstering too when the Landy is leaning.

I went for satin with my s1. Painted by hand and happy with the finish.

13- looks purposeful

I did mine twice earlier this year. Wasn't too hard apart from a stretched rocker shaft bolt snapping during the final torqueing up, hence doing it twice. The head was a swine to move on my own do do a Chris Tarrant and phone a friend. I had the head skimmed whilst off. Good luck. Toby

Cheers - I'll have a go.

Hi, Just wondering if anyone has got a 2,5 petrol head surplus to requirements? I am thinking of adding one to my engine. Cheers Toby

Well done and enjoy the rides.

I had this issue and a new earth strap cured it (after I had bought a new starter but fitted it anyway). Always try the cheaper this first before buying the expensive bits.

Hi, The S3 speedo in my LR is noisy. I have fitted a new cable and the needle doesnt shake or bounce but does make a noise (loud enough to hear over the engine and other noises!). Can it be lubricated to make more silent or is it a replacement needed? Cheers Toby

Hi, the LR is a s1 lwb on lwb rims with 750 tyres.

There is one but it was loose allowing the fit not to be flush.

Hi, I was talking the other day with someone about selling my 109 and they wanted to know more about the new parts I had fitted during the refurb. I started to rattle off a few things and the list never seemed to stop!! I wondered how long a list others would get to in getting their project...