Recent content by tmiletics
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
T
It seems I found the solution. I soldered a 1.8kohm resistor between the ecu ground (29pin) and the sensor signal ground (18pin) of the ecu).
-
T
Hello,
I bought an old freelander (L314) 1.8 petrol car 3 months ago. I try to repair but not easy to find parts and competent expert. The motor works fine but since about 2 weeks the diag show the o2 sensor (lamp) is fixed .435v (default) and the motor is in open loop state.
I replaced the o2...