Recent content by Tibimatt
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Thanks, lets see what happens
-
I bought it as a non runner, what went bang in this case was the bit inside the gearbox which connect the IRD and LH drive shaft. The gearbox has now been replaced however as i was refitting the propshaft i noticed this VCU issue.
-
Actually the guy i bought the car off told me it was replaced recently, I will however test it. But my question is, can a V6 VCU be fitted to a 4 cylinder vehicle?
-
Next issue, whilst cleaning up the prop shaft on my 1999 1.8 freelander I can see that the viscous coupling has been replaced, however the issue is that i am fairly sure its for a V6 model as it doesnt have a damper fitted, or any facility to fit one. Can anyone offer any insight to this, am i...
-
Dear all, does anyone have access to a repair or overhaul manual for the 1999 freelance IRD as I am considering doing a bearing/seal change whilst its out.
-
Update, IRD is out and I can confirm that the gearbox spline is stripped and the IRD is fine. I will replace the gear box and change the bearings/seals in the IRD.
Many thanks for your help
-
Update, IRD is out and I can confirm that the gearbox spline is stripped and the IRD is fine. I will replace the gear box and change the bearings/seals in the IRD.
Many thanks for your help
-
Is this known issue, and is the gearbox repairable
-
Yes this is clear, to explain the situation when we made this video the front of the car was jacked up, both front wheels removed, the LH drive shaft was removed. I was rotating the brake disc of the RH wheel and my son was observing and filming the LH side with the drive shaft missing. From the...
-
Aplogies for not making myself clear.
Please see the video link below, during its making the front of the car was jacked up, both front wheels removed, the LH drive shaft was removed. I was rotating the brake disc of the RH wheel and my son was observing and filming the LH side with the drive...
-
Hippo, your internal IRD page was very informative thanks. What I am missing is how the gearbox bridges the gap between the IRD output shaft and the left drive shaft. Do you have something to explain that?
As for your statement about the worn drive shaft splines (i am assuming you mean the IRD...
-
Dear all
I recently aquired a 1999 freelander 1.8 (non driving) as project, the seller seemed to think that the clutch had failed.
After getting it home and a little trouble shooting at the weekend we discovered the following.
1. The car drives but only at the rear wheels, this was confirmed...
-
Dear all
I recently aquired a 1999 freelander 1.8 (non driving) as project, the seller seemed to think that the clutch had failed.
After getting it home and a little trouble shooting at the weekend we discovered the following.
1. The car drives but only at the rear wheels, this was confirmed...