Recent content by THE BUDDAH
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Hello,
I have a discovery 1 on my drive.
Passenger side floor is missing (I was going to learn how to weld it back) and i think the starter motor has seized.
No lock or handles on rear door.
I drove it home from Wales parked it on my drive and its been there ever since.
Gearbox and...
-
The switches i bought are 12v 20 amps.
from here 12 V LED Switch
-
Cheers Smileysteve,
1 switch for tyre air compressor
1 " " roof lights x 4
1 " " cabin led light
2 " " volt meter 1 per battery
2 " " 2 x cigerette lighters
1 " " inverter
Does this mean i need 8 relays?
-
Hello,
Im looking to run some electrical extras on me disco1 powered through a fusebox attatched to my secondary battery.
I have had a dash plate made up with two volt meters some switches and two 12v cigerette lighter sockets.
This guy tells me that i should not connect anything to switches...
-
I think my gym days are sadly over.... Lol
-
How many amps would be required to run a winch wih a split charge system?
-
-
Hello,
I'm off to billing this weekend and hope to get a split charge system for me disco1.
I have one red and one yellow optima battery's at the ready.
What I'd like to know is what size (amp/volts)system shall I go for.
I notice there are plenty out there.
I like one that gives an...
-
Isn't there a slit along the thread that can be opened slightly by using a hammer and old screwdriver?
-
Im looking for a set of steel wheels for me discovery 1, Essex area.
Thank you.
-
Thanks to all for feedback.
My disco1 has the later model headlights fitted but not properly so i may purchase the later model headlight pannel and do the hole thing as one job.
-
Hi Josh,
Chris is right try YRM solutions they have a good selection of parts and pannels though they look a bit expensive to me.
I have the jobs that need doing on me disco1 when i feel confident with the welder and have the time.
Keep us all informed with your progress and plenty of pic's
-
Google images, amazing what i found....lol
Im told that the under wheel arch just beneath the headlight housing is not a M.O.T fail if its corroded away, doesn't seem right to me, but i want it replaced or repaired anyway.
-
Hello,
I hope this makes sense.
Im now looking for pictures of where the bottom of the inner wing/wheel arch meet the front of the disco1.
All i have on mine is a nothing, yes nothing a hole where there used to be metal.
I'd like to have a go at welding some metal back in place but not...
-
So thats where my cat gets to...lol