Recent content by TD5Tom

Thanks

Thank I will adjust it for around 20 to be safe

What psi will that be roughly

Yea I think it is the truck has a airtec intercooler and straight threw but I’m just concerned it may blow the head or the turbo I will lower it down

Will this much boost raise egt and or damage anything

I don’t know all I do know is that it definitely plumbed In to the boost so I think it needs lowering as I don’t know how much td5 can take before something will brake

Well I have the tee for the boost gauge in between the boost control module and the intake pipe that comes off the bottom hose from the turbo I prosume that will be reading boost going to the module

Oh right so I need to adjust the boost and lower it

I am unsure

Is this likely to damage anything

There are roughly 7 threads left and I’m not sure about all the sensors but the gauge definitely goes past 25psi so would the map sensor restrict the boost?

I asked the previous owner who told me the mapper removed the overboost but I know it hasn’t had a updated map sensor but it does seem to be boosting high on the gauge

Morning everyone My chassis is very rusty I have welded up the rear by the tank now most of the time chassis normally rot from inside out but mine has paint inside but the outside is very pitted has anyone experienced this I have been round it with a big hammer and plenty of oil it doesn’t...

Morning everyone I have installed a boost gauge and put the tee in the hose going to the waste gate now I know the truck has a map on it from mastraz which was already on it it pulls really well boost is reading on the gauge between 24-28 psi is this too much and how much drop in boost will I...

Hi guys can anyone offer me any information so I’m experiencing some very vague steering at 70 hard to keep in a straight line I have checked the track rod ends and the ball joints were replaced in March I did adjust the steering box in March and since then the steering doesn’t return to centre...