Recent content by Stof2484
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Evening all problem solved was a nakered RH drive shaft going to change the LH so there both done then it can have its prop re attached
-
It's 56 plate 2006 pal. I've managed to get some gkn ones through work going to change the right 1 tonite. Got j and r on at the moment
-
I mite see if I can get some gkn shafts and try that got to be cheaper than a fly wheel which I first though
-
I meant id never had an issue with the j and r drive shafts
-
Yes pal they are do you think the drivers mite be dodgy gear stick shakes like a bugger. I'd got in my mind clutch but that seems OK
-
I used the j and r drive shafts never had an issue before. It was fine till I stopped at traffic lights then set off and it started
-
-
Hi all
Td4 freelander 1 I'm getting terrible vibrations under power from the from end. I've removed prop thinking it was that no joy. Replace drive shaft on passenger side and replaced engine mounts still doing it any ideas
Cheers
Chris
-
Thanks everyone but I cant open the service manuel
-
What's the rave manual lol
-
Jock is the name of the landy lol. Cheers I mite have a go at bleeding to see if it improves
-
Morning all
Assistance required if possible last few day while drive jock my clutch pedal seems very springy but it seems to change gear ok is there anything to be worried about
Cheers
Chris
-
Hi Lord hippo
I solved it with the cost hanger method I can manage with that for the time being
Cheers
Chris
-
-
Hi all I own a fl1 2006 and th bonnet cable snapped I managed to get in to the bonnet with a coat hanger lol but the spring has now fell off is it easy or a pain to change the cable and put the spring back on or is it a bumper off job. I'm also in the process of changing a front caliper as its...