steve2286w's latest activity

Does the aftermarket gauge need matching to correct sender

they will give you samples and the main catalogue has full size sections. if you keep door opening lip (standard series) i used KRS 22 SELF ADHESIVE, but on defender plain edgesKR010, 118, 046, 042- there are lots, and they do KRS 9 a sponge...

Good range is it easy to work out which sections fit where 😳

Hi, i have just visited Kingfisher Rubber 01527 570570 in Bromsgrove. all the seals you ever wanted under one roof. Really helpful, I've scanned a leaflet Door seals and rubber matting ideal for the floors window stuff. everything. I came away...

Hi everyone, finally had the injectors tested today. One of them was dribbling all the time so that would cause the issue. They are replacing all 4 nozzles and setting them up to all open at the same pressure so they will be like new. Hopefully...

Drop arm ball joint replaced, bit of a ball ache (get it 🫣), but got there in the end! The atb diff helped mask the problem a little, but it got to the point where it was getting silly! Back to cornering on rails!

Have you got any numbers and letters cast in on side of block, between the core plugs , this will give the date block cast

Good luck with the knee replacement , and hope the pain a lot better afterwards

Good point, but it’s very repairable, and if I was fit enough to break it I’d fix it!

https://www.landyzone.co.uk/search/5256887/?q=Cutting+out+when+hot&o=relevance

When Land Rover brought out the Series 3 they started the suffix at A again. But now just to cause us confusion the location is on the top edge of the transfer box. Then there is the issue of what other folk have done in the past with fitting...

What’s it turn like with plugs out When rebuilding did you turn crank over as each main bearing bolt was nipped up

Having recently done one, bottom photo is part of the timing chain kit 👍

Last photo looks like timing chain parts