Solenoid just a switch , put battery live lead direct to the one coming out of starter or have a couple of heavy duty/ jump flying leads connected to the two lead ends and into cab and join there to engage starter
Cheers, it’s had four new General Grabbers yesterday and flew through MOT today without a single advisory. Garage said emissions really low and chassis solid. Happy Days!
I took off my overdrive today can anyone tell me if this looks worn ? I have no diagrams as to what this should look like but my overdrive is squealing Thankyou Nick
It looks like it has a welded nut other side of bolt, on mine I think it’s a loose nut.
If you take tunnel cover off you will see a lot better ( main gear stick and both floors out/ loosened
Sounds like it might be a bargain.....
If the rear chassis doesn't need plating /replacing
and all the electrickery works.
You don't get owt fer nowt, but if he really is a good mate and wants to stay as such...
Best of luck wiv it mate!:):):)
On my second go I riveted the cross members to floor and they sit on the chassis top on rubber cushions.
The U slots are to fix the door threshold , 2 pieces one shown in pic the other piece I need to change , prob go to yrm for that
You don’t...
not sure if i put a thread on here when i did mine in 2007
but the first think i looked for was the edge that the rectangular floor sits on underneath, and that was rotted away in a few places so i took the decision to buy an oversize piece of...
https://www.aluminiumwarehouse.co.uk/collections/aluminium-sheet?uff_pqk2qd_tags=5251H22
spec 5251 is the birmabright equivalent
you might have a local supplier who can cut it but heres an online one who cut it to your requirements
Welcome to Landyzone, you could try slacking off the nut on each injector in turn and see if the knocking stops which could be caused by faulty spray pattern on injector , have you series or parallel heater plugs and are these ok , perhaps you...
Just a quick update on this. I went over the basics and it was a combination of a broken heater plug and dodgy wiring. not allowing a good connection. New glow plugs and relay and it is starting as it should.
Sorry for the lack of updates, but I have been waiting for this t be done, I wanted to keep the original steering wheel and had to get this made, I just picked it up, and it looks and fits great, costs a few £££ but I think it's worth it so it...