Recent content by SkeetRover
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
S
Ok so I put earth to the up AND down command wires before the BCU at CO660 and can get the motor to turn when I do it both ways but it still continues to only turn one direction(window down) regardless of which command wire I earth. Secondly i volt tested across the the SK and SU wires leaving...
-
-
S
Ok gonna try that one last trick sierrafrey mentioned and if that doesn’t work probably gonna just put the window up and unplug it not sure I wanna try to reroute the wiring at this time lol seems so strange that it would randomly stop working all of a sudden. Ah yes joys of owning a LR thanks...
-
S
Ok so after a little more tinkering I’ve ruled out the motor as it works in both directions when 12v directly applied to the leads. Here’s what confuses me. I tested for continuity on the earth wire at the switch as well as the up and down wires at the switch all show no signs of a problem with...
-
S
motor is out of the door and disconnected from the regulator but still plugged in through the door wiring. gonna test swapping the power to the leads when I get a chance to rule out the motor being the issue for sure. Thanks for the tips y’all
-
S
don’t think it’s the BCU in that instance as I have the motor out and connected to nothing so nothing to cause any physical resistance and it still only works going down. Gonna check the wiring from the switch to the BCU when I get more time.
-
S
any suggestions on how to check the switch toggles other than swapping the wiring between the front window switches which is giving me the same problem just with a different button?
-
S
1999 disco 2. Front right side window was working fine until I had to pull the panel to work on something else and when I put the window down It would not go back up. noticed there seemed to be no power to get it to move up only down. So I pull the regulator and motor Regulator is good...