Recent content by sionnach

locked the car on the fob , 10 minutes later car wont open with the fob . Turned key in drivers door lock but door wont open but latch raised a bit when i turn key anti clockwise the indicators flash when i turn key clockwise nothing happens any help gratefully recieved

Datatek ordered the regulator you recommended last year , still aint arrived , started a ebay query now , will let you know how it goes

Hi P38 4.6 LPG , having trouble bleeding the in car radiator in the dash , top hose going in is boiling hot , bottom hose from radiator just warm . Is it possible to put an inline bleed in to the top hose ? and if so can you forsee any problems this might create ? Thanks Phil

Datatek What size cable would you recommend to go from regulator to battery terminals ?:)

will check the headlight wipers and the alternator , ta for info :)

Datatek If he wont post them to you , he can post them to me and I will forward them on to you :)

Datatek Thanks for the info . If you could send the link for the controller that would be great :)

Hi New RF reciever installed , BECM goes to sleep , 6 Month old battery , still happening

Hello. I have a slight battery drain which is getting on my nerves !! I want to make the rear 12v socket live , going to wire it direct to battery unless theres an easier way ? Can anyone suggest the best 12v solar power charger that will charge the battery ? Should I get a 12 v regulator for...

Hi Guys. My viscous fan seems very stiff to turn by hand, I have tried turning a different viscous fan on a P38 4.0 and it spins freely. Which is the correct version? and if mine is incorrect what is the solution ?, my fan is about 18 months old Thanks Phil :)

he did disconnect the battery, is it just a case of resetting the becm or is it more involved ?

Had an MOT 2 days previously, passed no problems , so was definely working then not aware of then washing / watering inside car

Hi Took the car in for a service and when I got it back front side lights were dead, changed bulbs still dead , rear ones working , any ideas?? Thanks Phil

Hi Guys I got a p38 4.6 LPG on a 2000 plate. The drive has got very bouncy lately . I'm thinking its the shock absorbers. Can anyone recommend a tried and tested make ? any help will be appreciateds Thanks Phil :)

Love to go but am in Eire over those weekends, maybe on a diff weekend ??