Shedload's latest activity

So I have fitted the switch.

There will be space under the console for a switch, but you do have to be careful where you drill as there a few wires under there. You can't just hook up to the main beam like on older cars. Best advice would be to take a live feed from...

If the engine light has lit once, there should be a code stored to read. This will direct you better than changing parts randomly.

Thanks all. Going to start with Filter and LP Fuel pump. If that doesn't work, I will look at the turbo hoses for leaks, After that a gallon of petrol and a box of swan vesta I think :(

New Monroe shocks just arrived from Paddocks. Good enough to pass an MOT as mine are original, and are very rusted. Suppose I've got to get off my backside and fit them now.... Still, another bit knocked off the very long list. Might tackle the...

Across the middle perpendicular cavities: 30 - 87... if it doesnt crank that way and no click from the starter solenoid measure for live on the spade , if it has +12V the starter is fubar, if no power the problem is at the fusebox or the wire to...

You can cut them ?

It's one of those modern plastic coil sprung things. A car of some sort. Probably got those fancy wind up windows and such like.

Boot Board to fit Rover Sd1 Mk2. May fit other models. Metal clips and edging still attached. Could do with a repaint, but wood is solid. £35 0n0

Just a note to say..... Watch your peepers!!.... I am 49 and have lived a long life and spent many hours grinding/welding etc......all self taught and whilst aware of the dangers of the spinning discs of woe, never really given a stuff as nowt...

Plan is for it to be built at the current JLR factory in Changshu China I believe. No plans for sale in Europe. Yet ...

It's only a name, you can hardly expect it to be the same as the old one or it wouldn't be new.

Installed my Flatdog boot shelf to keep random bits and pieces from being in the way of the main load space. Matte bonnet decal to reduce summer glare, with nice logo detail. Dixon Fabrication rock sliders fitted. Don't need them, but they look...

Actually I'd removed the engine bay fusebox to tackle a little rust. I was reconnecting all but I couldn't get a small white plug back into position. I thought I had damaged plug or pins but I called a mechanic friend who used a bit more force to...

My D2 Td5 Auto, I'm unable to delete, got going again.

C594 Auxiliary power connection. Center console 12v if fitted and other bits and bobs. Mike

all sorted changed the fuse box still the same it was the ecu thanks for all your suggestions

If you need spares this guy is good Call Paul on 01206 211623 - office 07828 278465 07760 955966 07840 428888

Thanks, in the end I gave it several coats of Raptor and used plastic washers under screws.

try

Just switches and a fuse board ? O' for the good old days. 😁 My Series has but two fuses. Apart from the heater plugs, not even a relay !

Don't leave me/us hanging. How are the circuits controlled ?

It's all sorted ;)

Could water be getting into the BCM module ?

Unplug one side HID unit, plug in a normal H4 bulb and see if the flickering still occurs, if it does the car is at fault, if not the HIDs are duff, simple and no fancy knowledge needed. Do not lean the H4 bulb against anything soft/plastic as...

I would look for an earth. 🤔

Maybe they share an earth? Now SF will come on and tell me they are switched through the earth!!!! I have no idea!

You could always check to see if both are getting power when the switch is pushed, give them a good dose of looking at. They may have simply seized.

1978 warehouse Pallet truck.😚

I mean, you can cut the rest off so nothing is there and then they can’t test it so it won’t fail. But I’d be inclined to replace them cause it sways like a cowgirl on a buffalo without them, in my opinion. If you did replace, you can get +2 drop...