Recent content by series 3 tel

hi i have fitted grey parabolics from paddocks and have replaced the bushes on the front set (supplied free from paddocks). Now after the london to brighton run and 1 off road trip the are worn out again. Any ideas Regards series 3 tel

Hi Anybody know if its possible to fit a disco tdi into a series 3 and whats involved and any probs etc Regards Series 3 tel

The bolts will be siezed inside the bushes so if you are replacing the hangers then use a 1mm grinding disc to cut through the bolts this will leave you with the bush in the chassis but the bolt will be in it drill out the rubber and knock out the the centre then you can hacksaw a slot in the...

:( Just fitted my new parabolics,front are spot on but rears have 3 leaves and the hangers are sitting vertical hav,nt tightened the shackle bolts but the old girl looks like a dragster. Should rears have 3 leaves on a swb, have they been sent wrong Series 3 tel

Thanks Tess Did you remove the bumper

Thank you for your help looks like i,ll have to remove the bumper then Regards series 3 tel

Sorry 52 plate freelander 1.8 es 5 door

I have purchased a genuine front fog light kit and the instructions say you need to remove the front bumper to fit them. Has any body fitted these and do you really have to remove the bumper.I am a mechanic by trade so its not a problem doing it but i can see lots of plastic clips breaking and...

hi stick to the 2 and 1/4 and fit a zenith from craddocks regards series 3 tel

hi try replacing the voltage regulator behind the speedo have had problems in the past regards series 3 tel