Recent content by scoobie232

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. scoobie232

    freelander sport Td4 towbar selection

    Ah little to far out for me but thanks, I was more concerned about the lower ride height and how low a standard tow ball would sit on the fitting kit, How to fit one wont be a concern :)
  2. scoobie232

    freelander sport Td4 towbar selection

    Picked up a tidy little Freelander sport Td4, 3 door, 18" alloys and removable hard top, I need to fit a towbar to tow a bike trailer and sometimes a box trailer nothing heavy duty, So when choosing a towbar kit do I have take into consideration the lower suspension / ride height compared to...
  3. scoobie232

    starter spinning but not engaging

    Lol, you could look at it like that, but that was in the title. Thanks for all your help guys.
  4. scoobie232

    starter spinning but not engaging

    Bosch starter fitted today, all good and a clean bill of health. Turns out a power drop from the solenoid to the starter left it unable to push The cog all the way forward, (corroded lead). Bring on the snow..
  5. scoobie232

    starter spinning but not engaging

    Hope it cures it for you Fevs :)
  6. scoobie232

    starter spinning but not engaging

    Thanks Greenhornet, After posting I went back out with the meter to check a few of the suggestions from other posts it was soo cold one of the leads broke off my voltmeter, after that I pulled the starter again and got it onto the bench, testing with another battery was inconclusive there was...
  7. scoobie232

    starter spinning but not engaging

    02 TD5 Auto 68k As per title the starter is spinning but not engaging,battery was a bit suspect and was replaced with a new one, I pulled the starter and checked the teeth on it and the ring gear, all good. checked the contacts which looked worn so ordered the kit (plunger and contacts) fitted...
  8. scoobie232

    What have you done to your Landie today.

    Got the disco 2 up on the ramps and pulled the starter motor, F*#king top nut, 2 hours later its on the bench waiting for the plunger and contacts arriving in the post. Hope its not Yodel :bored:
See more
Back
Top