Recent content by russ22

yes indeed, will check the numbers and will try swap plugs only, but still wondering why there are no faults when disconnecting them and check engine on after driving for some time

not what I am aware of. What i will do probably try and swap sensor2 and sensor3 on the same bank then have a good driving test

I have a problem on 2 banks but thank you for idea)

P0144-00 Oxygen sensor- circuit high voltage Bank1 sensor3 P0142 Oxygen sensor Bank 1 sensor 3 P0164 Oxygen sensor- circuit high voltage Bank2 sensor3 P0162 Oxygen sensor Bank 2 sensor 3 Faults don't appear before after a good test drive. If sensors plug disconnected shows no fault.

Only sensors1 and sensors2. For bank1sensor3 and bank2sensor3 the scan tool showing 1.25V and stays like that on fully warmed up running engine. Voltage measured manually as well. ECU pins in good condition

Range rover supercharged 5.0 2014 (6 oxygen sensors) I have fault on two sensors Bank1 Sensor3 and Bank2 Sensor3 the voltage is high. Oxygen sensors heating (thick wires) is perfect, tested with the bulb. There are to wires that oxygen sensor is using apart from heating. voltage on one wire of...