Recent content by roy ingram

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. R

    Discovery 2 ACE issues

    Must admit I haven't changed the dowty washers - even though I should have as they shouldn't be re-used. I am expecting to be chasing leaks on the pipework so will probably be removing the pipes at some point in the near future so will change them once all the other work is complete...…….or if...
  2. R

    Discovery 2 ACE issues

    Hi all, Just to say thanks for all of your help. Managed to get the pump primed today by running the engine - it still took about 10 seconds to prime though. Banjo re-connected and ACE now working as it should with no warning lights. I will monitor for leaks but I've done quite a few miles since...
  3. R

    Discovery 2 ACE issues

    Hi Stanleysteamer, To be honest that was one of my next points to check - that the pipe from the reservoir to the ace pump is free of blockages etc. It's not obviously collapsed. I checked and re-checked the routing of the serpentine belt as I put it back on so I don't think it's that, but I...
  4. R

    Discovery 2 ACE issues

    Update - I have just tried to bleed the pump but haven't had much success. I removed relay R9 and the outlet banjo from the pump, and while my missus cranked the engine I watched the pump outlet. We must have cranked the engine for a couple of minutes and nothing more than a drop came out of the...
  5. R

    Discovery 2 ACE issues

    Hi Stanleysteamer, Was your problem a leak only or did you have no movement in the reservoir like me? I'm going to bleed the pump later today and then try and source the leak - was your leak on the pipe with the banjo fitting or the other pipe that returns to the reservoir which is smaller...
  6. R

    Discovery 2 ACE issues

    Thanks - think we were typing at the same time. I will give that a go during the week and report back.
  7. R

    Discovery 2 ACE issues

    Thanks jamesmartin, So - do I need to remove the pump to prime it or can I leave it bolted in-situ? Thanks, Roy
  8. R

    Discovery 2 ACE issues

    Hi, I've just found it - looks like it's coming out again! Thanks, Roy
  9. R

    Discovery 2 ACE issues

    Hi sierrafery, Thanks for your reply - no I didn't prime the pump as I didn't know it was necessary. Would you be able to confirm how, please. Thanks, Roy
  10. R

    Discovery 2 ACE issues

    Hi All, Having recently returned to Discovery 2 ownership after a 10 year break, I'm suffering issues with the ACE system on my 2004 TD5 Landmark (as well as saggy headlining, leaky sunroofs etc!) The other day the red ACE warning light started flashing along with a 'boing' warning, but it...
Back
Top