Recent content by Rowbear

Thanks for your thoughts, it's very random, were it to be regular I could record the change. When it runs bad there is reduced power, hills become difficult. The fact I don't have any eng light while it's running in some sort of limp mode and if I switch off and restart it goes fine...

The first one (LHS) is running bad.

Hi Nodge68, please find attached trace data from my scanner. I would appreciate your opinion. History, I had travelled 1.5hrs to location without any problem, on my return home after about 15mins the car lost power, I keep engine running and connected scanner. After about 5mins I stopped the...

Just took it for a quick 20 min run, unfortunately no problem all went very well. Pushing hard on the hills etc. I shall carry the scanner with me, When the fault reappears I can grad the data. Just curious about the LR fix re cables sensor/ECU, do they go disc or high resistance?

Hi, I'll do a scan tomorrow and get back with my figures. As per other reply, I've been steered off course with the problem re sensor to ECU cabling. Many thanks for your help, speak soon.

Hi, it was live data, I'll do another scan tomorrow, when it happens the graphs drop on everything lol. I think the high pressure sensor/cabling LR recall has sent me off course. I did put another high pressure sensor in (an old one) the engine went super for 3 days.... then away again. Many...

Hi guys, I need a little direction on this one. My 2006 td4 loses power, starts ok, runs fine until I push for power then it loses power. No fault lights, scanning shows reduced high fuel pressure, if I stop the engine and restart it will run ok until I push for power. I've changed the high...

I've changed the filter, the low pressure pump seems to hold pressure. It's what I'm going to monitor next? When it goes into this mode it drops into limp mode, the scanner has most inputs reading low and on most occasions no engine light. That's for your info re correct section, I'll do...

Hi guys, I need a little direction on this one. My 2006 td4 loses power, starts ok, runs fine until I push for power then it loses power. No fault lights, scanning shows reduced high fuel pressure, if I stop the engine and restart it will run ok until I push for power. I've changed the...

Hi guys, just joined the site, looking forward to the forums and becoming educated lol. It'll all help to keep my 2006 Freelander td4 rolling along.