Thanks Allan - I’ll deffo have a look at the heat gun thing - I think a dye may be the answer.
I get the feeling that the hard plastic of the Classic Dash just cannot hold it’s colour.
I think I have some back to black somewhere which is...
Not sure, a bit of careless handling when moved around the garage.
They are not deep or anything, but leave a white line, like the colour has been taken off.
Hi All,
I am finally putting back the dash etc and wondered if any of you had any good ideas on how to remove scratches from a Range Rover classic dashboard.
Mine is grey, I have tried standard dash cleaner and that didn’t do anything but make...
Firmly pressing the bottom corners until each of the latches click is the technique I always use on a standard steel 'gate.
Don't think I'd want an alloy example as I've read too many comments about lack of rigidity.
I believe it is possible to straighten it, there was a 'how to' on another forum but I can't remember which one.
Involved putting a long piece of wood against the bottom centre of the top tailgate & the other end on the ground/opened bottom...
Many thanks - I wish the previous owner had known that!
Do you know if they ever bend back in? I have adjusted the catches as best I can and even moved the lower tailgate in a little - so now at least they both do latch correctly.
Hi All,
Just a for information only. Both my new car and the donor car had non-operating tailgate switches for the interior light.
Both had aluminium tailgates fitted and when closed they would not open the switch. So I purchased the correct...