Recent content by roady

Thanks, i will try what you suggest, i have used easystart and the engine does fire up.

the glow plug light comes on then off as usual,the engine check light does the same,i have checked the ribbon fuse to the glow plugs o.k relays 15 & 19 are clicking when ignition switched on but not run a test accross relays themselves, would you open all the injector lines at the same time...

Hi Wammers plugged the nanocom in and it is definiatley only three digits in EMS EDC code and the same three in the BECM which you are right can be re-written but only to the BECM with the nanocom have you got an idea whats wrong

Thanks for the reply Wammers i have used the syncmate and i get the solid blue light followed by solid green which should mean it is connecting the two can you set the ems code with a nano there is a three digit immobilisation code

Hi fitted new in tank pump now cannot start the p38 i have tried the usual things i have fuel to filter and fip but not to injectors. fuel soleniod is clicking and i have 12 volts when ign on and when cranking engine. i have a sync-mate for the edc so the becm is communcating with ecu but it...

Hello Im Brian from Wordsley a fellow 4x4 nutcase