Recent content by RoadrunnerA65

Thanks for the replies, I now understand a bit better how the light works. I'm sure it's connected correctly. It's difficult to get it wrong because the B+ brown wires have 9.5mm twin spades and the D+ has 6.3mm spade. Continuity and earthing all checked out as ok with multimeter and engine...

Has anyone any suggestions on how to solve my alternator problem. My old alternator was electrically fine (bad bearing) type Lucas LRA356 (45A). I wanted to uprate to 65A so bought a Lucas LRA406 (type133) on fitting the ignition light would not come on. Refitting old Alternator everything works...

Hi, there are several possible ways to treat the area. The easiest is probably to use black "smooth" Hammerite. My choice would be to buy an etch primer and Land Rover chassis black, both are obtainable on Ebay. Note: this method of protection will not go over the top of underseal or Waxoyl.

Hi, just joined when searching the net for a tool LRT-12-029 (18G 1457). Havn't found one yet but the forum looked interesting and maybe one of you has such a tool that I can beg, borrow or buy? I bought my 110 in Feb 10 when my car sat on the drive going nowhere in the snow, as it's an auto...

Hi, I've just joined and saw your query. I have a 1986 110 2.5N/A and fitted power steering last year. It is straight forward if you get the right bits but a nightmare if you don't. It's always the little things that cause the hassle. By far the easiest way is to find a unmolested 2.5N/A...