RiffRaffRevival's latest activity

Absolutely, I really got off lightly there! Have a spare 'box in the garage, so swapped over the reverse gate assy and she was good to go 🍺

This was the culprit... reverse gate hinge pin, slipped in the gate assy (pin had worn), allowing the gate to twist when selecting reverse, thus preventing clean gear selection. Thanks everyone again, for the help and support.

Got it... BUT it took a fair portion of brute force and ignorance on my part. Basically, splayed out the sides of the tunnel and lifted out at the rear... much scraping, jamming and profanity and she's out. Thanks everyone for the guidance. 👍

Thanks everyone, for the guidance. I think I've got to the bottom of it... BUT will keep the lid on my enthusiasm until the necessary part arrives! Fingers-crossed!

Thanks tottot... the panel will simply not lift over the gearstick, as it fouls the heater matrix. The vent located on the seat box is easily removed.

Series 2 Lightweight... I have gearbox issues (separate topic), but trying to remove the gearbox cover/tunnel in the cab, with much difficulty! Does the heater matrix need to be removed, water pipes disconnected, etc, to enable the cover to be...

Back to Landy ownership after many years away. Driving my '72 Series 2 Lightweight home yesterday (100+ mile motorway journey, at a steady 55), 4th + OD almost all of the way. Pulled in to the motorway services for a comfort break... only to...