Recent content by richardpalmer

The pipe that goes between the air box and turbo does not have an oil feed but it does have a breather connected to the cyclone oil separator on the off side of the engine. Do you get the noise or vibration if you disconnect the pipe between the intercooler and the plenum chamber, it's worth...

Take out the intercooler and make sure it if fee of mud and muck, defiantly worth doing.

Hi , I have a 1994 300Tdi Disco ES Auto and am looking for a device to re-set the SRS light on the dash. The SRS is re-set with a four pin plug with yellow and black wires has anyone any Windows software or cables I can buy? My motor does not have an OBD connector.

I hope you get it back mate, whatever the tax status it's your motor and you have obviously spent a lot of time and money getting it the way you want it. I am in Kent and I will be keeping and eye out for you mate. Good luck fella, keep yer chin up.

UJ's are OK It is not road speed related only engine speed. If you back off the power the vibration stops. it is at exactly 3000rpm in each gear.

I replaced the Engine with a recon unit about 8000 miles ago and fitted new engine, gearbox and transfer box mountings so done think they are hard.

I have the same vibration problem and I am being told it is the Flex Plate, I have just changed the flex plate for a good second hand one, I have also changed the torque converter and auto gearbox for good second hand units but all that this has done is move the vibration progressively up from...