Recent content by REVVER

Re Three lights on. Took it to the local garage and they hooked it up to their test equipment and it showed front left ABS sensor fault. Went in below at home and sure enough the sensor ring on the drive shaft ( theres a proper name for it, but I can't remember it right now) which you can just...

Hi Malcolm. I think you'll find its the small splash guard at the bottom their referring too, not the the whole inside one. If you look up at it you will see the three bolts fitting vertically into the chassis member, where the splash guard turns out at ninety degrees.

Yes, I've got exactly the same symtoms on 2001 TD4. The three lights were coming on and off randomly for some time, now mostly on all the time. Coming out of the shopping centre yesterday and braking slightly before turning left on to the main road, I felt a pulse on the brake pedal and the...

The condensation on my windscreen was awfull too. I carried kitchen rolls around to remove the worst off it. I checked for leaks everywhere and there was no damp smell around. One day when waiting for SWMBO in the rain I just happened to see a tiny drip falling in the passenger side at the...

Yeah Buy a proper Landy and build your arms up trying to shut the doors.

Yanick. Sorry, its a few years since I took mine off and modded it for an easy oil change. There are an additional two self tap screws at the front of the guard on either side which hold the flappy bits on it too the bumper. You will also need to take out the other four 13m/m bolts in...

There is absolutely no need to drill any of the rivets out to remove the sump plate. I see you have the back bolts out so take the two bolts out at the front up through the plate and remove the two self tappers holding the plastic grill to it and its off. When you have it of cut a hole around a...

Nags What exactly do you do to repair it.

Hmmmmm. Twaddle ?.

Hurrah, The old farts becoming pleasanter.

Ask the 'Mad Hat Man'.

I'd love to know why they say that.

Ok back to the problem. If its worn and loose its got to replaced, it want be helping reduce vibration at all in that condition. However theres a few things which could cause vibration. VCU support bearings, the rubbers can go soft and worn, and fixing bolts, and the UJ joints.

Hoi Redhand steady on old chap your losing the plot. Anyway I'm ****ed of with all this, I'm sure you are too, do you want to go down the pub for a jar or two, and talk Landrovers, welding plants, lathes, etc, etc, etc. PS. I'll even branch into soffits if you like.

Hoi Redhand You punched that reply in well, Thats the nearest to English youve got in a while. Your not going to turn all posh on me now are you. Now bugger off and start a wee thread of your own for a change, instead of jumpin on the band wagon all the time.