Recent content by Redrangie1990

Hello there, could anyone tell me please as where I could obtain a wiring diagram for a1990 RRC 2.5 td VM from? I've been googling and searching for one and am really struggling to find any information, Thanks for yourtime, Regards Steve.

Thanks for that, its put my mind at ease now Ive seen one

Hello, Ive been fitting or attempting to fit a 300tdi engine into my 1990 RRC that was a 2.5 vm engined model. Dont want to sound a bit thick but is the crank bolt the centre point of the engine? As I have measured between the 2 chassis legs to find the central position and lined the engine and...

Hello, I'm fitting a 300 tdi engine into my 1990 Range Rover Classic. What I'm struggling with and trying not to sound like thickie is that where the centre of the engine is. Is it the crank bolt? As I have measured between the chassis and marked it and when the crank bolt is in line, I cant...

Hi I've got a 1990 RRC, with the LT77 manual gearbox, and Im collecting a 300 tdi engine to install. Originally it was VM engine powered. Will a R380 bell housing fit to the LT77 gearbox or will I need to fit the 200tdi bell housing to the gearbox? Thanks in advance for all replies

Yes that all seems to working ok and drove it in low range a couple of days before it gave up the ghost. Will double check it again though,and thanks for advise.

How can you test the viscous coupling then?

Yes its LNH so must be lt230 thanks

Im replacing the engine anyway, going to put a tdi in as when I bought it, was fitted with vmengine that had 2 cracked heads, so I fitted a mitsubishi into it and not happy with it, so going down the tdi route. Not sure of what the transferbox is but Ive not changed the gearbox so believe its...

Thanks for that as it sounds the ame as what has happened to mine. Will know for sure at the end of the week when the engine comes out.

Thanks for that, I will check it tomorrow and let you know what I find

Hello, I have a 1990 RRC, with the LT77 gearbox, and the other afternoon while travelling home, I went to pull away in 1st gear at a zebra crossing and lost all drive. The clutch pedal is operating ok with no fluid lost, but when you let up the clutch pedal theres a grinding noise and it goes...

Thanks

Hello everyone, heres my 1990 2.5td vm that has took me 2 and a bit years to get to mot standard]

Thanks for that, but it has a new tank and fresh diesel.