Recent content by Rebz

It was wasn't it fair play. Mine don't look anything like as bad as that thankfully but I will have a more detailed look at them to be sure :)

So I've had more of a look and I think it can be repaired. Mainly I confess because a mate of mine who spent many years fixing ones that squaddies broke has had a look and agreed to take it on :D

With the notable exception that your way further along in resto than me lol.

Best go find the manual section for removing the rear body then, just about finished rebuilding the front of the bloody thing. I'll have a good look this weekend hopefully (true to form this goes down when one is injured) on whether the whole thing is shot or if i can get away with the bottom...

So that's a no to just cutting the floor of the tub out and replacing after job is done then and body off XD Christ

... lush

Battling to get my 110 csw on the road, project was rather set back since flooding in Feb 2020 and the pandemic (sadly I hadn't much time to work on her) so the firewall is rebuilt, new clutch and flywheel with the gubbins) almost mot ready so I thought I'd chuck it in and see what comes back. A...

Already fitted new hd arm, bearing and clutch kit :) now just need to get that big box back on, which is fun 9n my tod

Well it's out and the friction plate is welded to the pressure plate

Thanks v8250. The water sort of came to us in South Wales before lock down so i wasn't prepared, but yes that is akin to wading without ze plug, still could be worse lots of people lost their motors, homes and businesses entirely in the floods. I have the replacement HD arm etc here to swap it...

I should add a thanks for the second opinions guys input always appreciated cos im a landy newb

I know james :) it's not grand in there though is it, much sand paper to be needed for the fly wheel and junketh the clutch. If one will get in to 3 foot of flood water before lockdown leaves her standing this is what happens ... thanks 2020 your the best

Not grand is it

Anyone think it might be this

Well ... the slave was a little worse for wear bit of wear and rust in cylinder towards end of travel and some nasty coloured crap came out when bleeding, but no joy clutch still engaged, guess its box out even if just to free it up so i may as well check condition and renew any and all worn...