Recent content by Pkplonker

Have you checked for continuity of the wiring between the relay and the pump? And also checked voltage at the pump end? Also, does the fuel pump relay click when it's supposed to? Just work back from the pump back to the battery if you think the pump is fine?

Oh no! Sorry to hear that! I'm on holiday now until the new year so won't be able to try any of these suggestions out until 2016 :( Thanks guys.

Clutch feels fine. That being said, not my day to day car so it's feels different to me anyway.

About an inch from the top. Not full, but believe that's enough!?

Evening all, I've got a 1988 land rover 90 with 2.5 d NA and LT77. Out for a drive this afternoon, and lost gears. I can only select a gear whilst the engine is off, when it's on, I cannot select or change hear. Happens in all 4 modes of the transfer case or any gear that I select. (reverse...

I don't know what that is? Sorry!

https://www.4x4tyres.co.uk/ New set of 5 KM2's and wheels. Great prices and good service.

0 offset. No spacer currently. Need to see how the work for me.

Pump received today, fitted it, bled it, cranked it.... She's alive!! Thank you all for your help!!

Hi guys/gals, Do you think I need extended arches? FYI - 255/85 Thanks.

Delphi pump ordered :)

Not getting any suction blocking both pipes on the fuel lift pump so I think it's dead. New one going to be ordered from Craddocks. We will see where that gets us! Thanks for the continued help

Thanks again. No matter how many times I try and turn it over a smidge, it's not landing right allowing the hand lever to work manually. The difficulty is that it's a 2 part filter, which makes it difficult to fill, then install. Am I better to stop the filter bleed and just start bleeding...

Thanks guys! So, little bit of progress, I've reconnected everything back up and am using the starter to turn it over, get it firing occasionally. I've got all bleeds and banjos shut to try and build up the negative pressure and then bleeding occasionally at the filter. Still not fuel coming out...

Hi all, Could not find anything in the search so this has called for my first non introduction post!! I have a 1988 2.5d N/A. Just changed the fuel filter and am not getting fuel to pull through. I've slackened the union bolt on the filter and nothing is pulling through. I've since taken...