Recent content by philpremo
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
i did not change the clutch it was only replaced a year before i bought the car
i changed both the slave a LUK one and the master both from europarts
does not high rev or no clutch slipping when driving
the pedal as always been low but now i need to pump no fluid in engine area i can see
-
help i need to bleed my clutch
is it a simple job or a garage
i changed the LUK slave last year so hopefully its not popped again
Anu advice will be grateful
-
hi put your reg number into europarts and click service items all there including the oil
the oil breather to the back of the engine will need doing too and change the turbo breather as well thats at the back you can get to it via the front wheel arch
ant more help just ask no special tools needed
-
anybody in the hull area who can help me open my bonnet i would very much appreciate,
popped the rivets but need help ,the cable has snapped inside the bonnet and mot due soon
i have a freelander 1 td4
-
hi and welcome
same freelander as mine
-
HELP my td4 bonnet cable has snapped anyone got any ideas to open need someone to help open it
-
hello imnew to the forum but would like a couple of hours help removing my td4 2.0 diesel manual gearbox
-
hi im new to this and just got a freelander td4 but the slave drive is leaking so i thought i would change myself easy so i thought
got up on axle stands nearside wheel off drive shaft out oil in both boxes drained all but 1 bolt in gearbox out near the ird and now im climbing the wall i need a...
-
hi im new to this and just got a freelander td4 but the slave drive is leaking so i thought i would change myself easy so i thought
got up on axle stands nearside wheel off drive shaft out oil in both boxes drained all but 1 bolt in gearbox out near the ird and now im climbing the wall i need a...