Recent content by Petrallis

Fixed the issue Just to update the post, after removing the modulator i discovered that one of the servo valves was stuck open letting pressurized fluid pass through and block the front right wheel. Thats why i felt the pedal pulsating, it had nothing to do with abs. Many thanks

Didn't think of tha flexi hose, maybe thats why it pulls on the right , due to restricted or blocked hose on the other side. Thanks

Yes, every time step by step in the correct order. I drive the car hoping that if it's air it will move and then after another bleeding, no difference.

Having the same issue, was there a solutions for you problem?

Just an update, after bleeding once more. Some air came from the 3rd nipple of the pump and after test driving it i felt the abs for the 1st time so i can definitely say that what i was feeling was the pedal pushing/pulsating back on my foot and not the abs. That being said, all the calipers and...

Yeap, bleeded all 3 nipples once more today

Yes, all 5 times using more than 7 liters of brake fluid.

P38 1996 4.8 petrol After replacing the accumulator and bled the brakes(5 times thinking there is air in the system), my brake pedal even with the slightest touch engages the Abs even at standstill, even with ignition off, even with all the relays and fuses out of the abs system but with...