Recent content by Oscar7

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Cheers, will try that
  2. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Couldn't get steering lock off without starting engine. So sounding like PAS motor?
  3. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Have now connected the new pipes topped up fluid, started engine to get steering lock off then moved steering wheel left to right, topped fluid up again and drove about 6 miles and steering went heavy and was difficult to turn. No obvious whining coming from PAS motor. Thinking of taking pipes...
  4. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Thanks Nodge68 will try this
  5. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Thanks Nodge68, look like I haven't lost my sanity. They are aftermarket. Do you have a recommended site and I will order a new set.
  6. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Hi, this doesn't look right (took other pipe off to show a clearer picture), but is positioned in steering rack correctly. I would expect pipe to be straight up or leaning towards front, but is lining up with steering column. Any help appreciated as beginning to question my sanity.
  7. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Nearly there with connecting all the new pipes, but the pipe into the steering rack doesn't line up with the pipes from top of car even though the fitting to the steering rack seems to be OK. Have I missed something, am I just being stupid?
  8. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Thanks for the tips, I will order the reservoir and hopefully up and running in the next few days.
  9. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Hi Nodge68, thanks for the advise, I have these parts so will replace also. Anything to consider when I do put it all back together?
  10. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Hi Nodge68, are these the pipes you are talking about?
  11. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Now finished, bolt was tight, but eventually managed it by grinding, using a cutter to make a groove in bolt, then long screw drover and heavy hammer to get off. Hope putting the new bits on is not half as challenging; any tips of things to look out for?
  12. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Yes, was initially using torx. Now started the grinding and will finish tomorrow.
  13. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Thanks Arctic2, couldn't get an allen key to stay in and glue didn't bond, so will try grinding it down tomorrow. Had problem with the other bolt also, but managed to cut and chisel that off.
  14. O

    Freelander 2 (LR2) PAS Hose Hex bolt removal

    Thanks Nodge68, I'll persevere and if still no luck will try gluing a hex bit onto it. Will update on how I'm getting on. cheers.
Back
Top