Officerdibble's latest activity

The spot weld are a lot bigger than rivot holes so I haven’t figured out which it’s the best way to do it , probably wait until the part I’ve ordered arrives & contemplate a plan

https://yrmit.co.uk/product/fuel-filler-neck-lr-defender-90-83-98-not-td5/

Nice one …. Ordered

Mine looks like it’s been spot welded so might be a bit trickier to remove

Hi ppl, Is there such a part ( I’ve looked for a part on here on the parts numbers sticky) can’t find anything anyone got any ideas or do I need to fabricate sumit Cheers

Flush new fluid into your system as brake fluid is prone too deteriorate over time which could be the soft pedal condition you mentioned, & as above regards the brakes

Some of the jobs I missed off new rear prop , poly bushed rear trailing arms couple wheel bearing, new diesel tank , new battery box , timing belt , new water pump & p gasket, upgraded clutch spring

Enjoy

Personally speaking I’d have a 300tdi 90 on a 95 plate which my son purchased in 2018 he bought it only really knowing it had a rc galvanised chassis replaced in 2014 , not long after purchasing we realised both front brakes were seized which we...

Did mine a few weeks back had to take floor and side rail off , pain in the ass

For aluminium door skins

Yes

Hi everyone, it’s a 300tdi 1995 90 & I need to replace the inner swivel housing gasket as it’s weeping grease, so can I get away with unbolting the swivel hub at the axle & pulling it off with the half shaft , so I can get away with having to...

Swivel Balls Here's how ah did it:D First ah slackened the wheel nuts and drive flange nuts. Jacked the bus up and then removed the wheel, took dust cap off and removed the drive flange. Next ah took the brake calliper off and sat it to one...