Recent content by Mugatu78

For anyones info that may find thjs thread. Noise came back after about 50miles or so. Got the scrabble stopper ecu reprog by auto fault finder and noose gone again. Hopefully that is the end of it, service was great they had it back to my house within two days sorted. Happy man.

I should add i did notice a bit of a high pitched whine while on full lock but not sire if thats my wheel Bearing or diff. Hopefully will go away anyway and nothing like what it was. Huge improvement at minimum so very happy.

Well wee update. Today i removed prop shaft enough to get haldex out and swapped for one from breakers i got for £150 got it all back together new filter and oil took for test drive and to my astonishment i think its fixed haha. Only had time to do short test but back wheels not skipping no...

Ok perfect. Will use thread lock. Will try find a video for reference regarding lowering the diff. Thanks

Yeah sounds like a plan i’ll have a go why not. Not confident with the diff but ill get a proper look at it and try figure it out thanks. Look forward to the end of this issue Thanks again 🍻

Do you know if i will get the haldex unit out without dropping the diff ? If i disconnect prop shaft is there enough play to get haldex out or is not that easy ? 🥺

Ok hi. So since last post i decided to drain it again and refill with fresh oil and hopefully get more dirt out. Oil was black again only couple weeks old, swapped the pump and the valve from the breaker one and filled with more fresh mannol haldex oil, so its still sticking in awd and draggin...

Ah well update not great. Got unit from breakers. Swapped ecu hoping for an easy fix after service made no difference, still same noises. Drive 15 mins and got reduced traction transmission fault code again, read codes using icarsoft i just purchased and its the same faults i had on previous...

I have u it coming from breakers. Will swap ecu over and see if any difference, if not i think i will try this scrabble stopper reprogramming. Thanks again

Excellent glad you got it sorted and thanks very much indeed. Will keep posted on how i got on 👍🏼

Ah i see. Yeah i wondered if it would even reach reach the accumulator. Was just a thought. Thanks very much for your input. Always appreciated

Ok thanks very much for that. I wondered if i could fill the haldex with degreaser and let the pump run with ignition on but no drive, wondered if that could flush through the accumulator then drain flush with haldex oil and refill. Just a thought. Not sure if that would work or reck the unit...

Hi there. New fl2 owner with haldex scrabbling shuddering problem on low speed turns only. I believe im in 4wd when i shouldnt be. Read lots posts and watched videos so serviced unit and its the same mby even v slightly worse infact, i remived split open haldex ecu and cleaned with contact...