MJW94's latest activity

Yeaaaa it was a bee's nest behind the headlights, iv had to rewire most of it as i found stuff like this when i pulled the lights out... which iv put right and soldered in new connections. Its fine until i start driving, then it starts to flicker...

Before you adjust the steering box you need to check all ball joints and drop arm, steering column ujs etc. Manual will tell you the proper way of adjusting the steering box, pretty sure you can damage it otherwise. Just so you know I doubt temp...

Ahhh oki doki, ill make sure im careful, i have a work colleague who has had plenty of defenders over his 40years of driving so he is giving me a hand with things im not sure on, and i shall keep that in mind going forward, I have a feeling the...

Apologies for the late respons been mega busy, and the app notifications dont seem to be working... So after reading though all the docs and invoices i got with it in a folder, there is an invoice for a Raised air intake/snorkel kit from bolt on...

Here you go, not managed to tidy it up as it seems to been left in a mess when i got it. It doesnt seem to have an air filter so i assume the previous owner had a snorkel with a mushroom filter on top but removed it as there are threaded holes on...

Ahhh okay, then it is the disco engine as the turbo is below the intake manifold, learn something new every day! Thank you 😊👍

It looks tidy from a far, theres a few bits i need to touch up and sort, need to sort a new rear door as it has rusted away quite badly on the bottom bar on the frame but the door skin is still in good nick thankfully.

Its the 200tdi out of a defender from what iv been told, it was done by the previous owner, only got 100k miles on the engine.

Welcome, my son has one also. Defender or Disco engine?

Hi and welcome

Hi and welcome! Very tidy looking Landy! I’ve got a 90 of the same age with a 200Tdi.😁

Hello all, First time landy owner here so apologies if i ask the obvious questions, so please go easy 🤣! Bought and collected a 1989 Defender 90 with a 200tdi engine at the weekend as a on going project! Already changed the headlight and tinted...