Recent content by Michufc

Do you think that over night the oil is seaping past the oil seals then if so do you have a rough idea what it would cost mate

Yes to be honest it's starts pritty much straight away

Hi all I have a 90 pickup with a 200 conversion in it. It have started to get worse in the morning first start and it chucks blue smoke and miss fires with a bit of increased revs it clears and I drive 100 yards up the road and it's clear then I stop it at the shop and restart and it's like it...

Hi all how I came about to discover this was I was fed up with my roof giving me a ice cold shower every morning so I had some thin insulation boards from a job left over (celotex) so I stuck this to the roof not sure if it would work. I went out in it yesterday the warmth and sound difference...

Hi mate I started a thread about this the other day and I had loads of great advise thanks to all by the way. I had the same problem the puller and smacking it with a chisel didn't move it so I had to use a combination of it all like you I didn't want to damage the threads so I used the grinder...

That's next on my list it looks like blue tac is the way to go

Just tried big hammer and chisel with the puller attached its just not moved. I think it's time for the angle grinder but I think it won't go down to well with the neighbours if I did it now :hysterically_laughi:hysterically_laughi:hysterically_laughi:hysterically_laughi

Ok mate will do cheers for your help

Cheers for the help I will try the drift first in the morning that will cheer the neighbours up and I will let you no how I get on tomorrow cheers mike

Bloody hell I hope I don't have to do that but at this Rate it might be the only option did you do that in situ or did you remove the box?

Hi everyone I am having a mare at the min just desperate to get my 90 back on the road I need to replace the drop arm due to ball joint excessive play So new arm has arrived and out comes the puller and nothing it's not moving so I got my blow torch out and still nothing so I am after another...

Hi mate I live in sunny Nuneaton and also am into shooting I have just read you thread on air rifles and you mention that you like to go to ranges. There is a air rifle range on the a5 next to the lime kilns mate

Hi to all thanks for your help I have sorted my parts thank you again

Hi I am looking for a truck cab and tailgate to convert my 90 Any condition considered cash waiting Cheers mike:)

Hi there I am after a truck cab and tailgate to convert my 90 van Please call 07894444331 if you have one cheers mike