Have changed it and must say I find it much better on my eyes but also when other cars come somehow it seems to take away the bluelight. So far no negative issues as you've mentioned, but will see outside city.
I've changed the MAF in the meantime for the cheap Chinese one and the old Bosch that I had still around and all gave me same error. Could there be something else causing the error as it's odd, that all three are giving me the same fault code?
Did you try if the brake pedal or break light switches work? Cost 10£ to change the
XKB000020 XKB000021 XKB000022 XKB100150L one and it worked on mine, sorry copied it over and now all bold.
Morning All,
Came across that fault code in Pscan yesterday due to MOT coming up and was wondering if it means the MAF it is done and will need a new one? It showed 19 degrees yesterday eve which was clearly wrong. I read in some threads here...
Thank you @Nodge68 that's very interesting. Especially the part with vehicles coming towards me when having yellow bulbs. Did you test that for yourself or was it someone you came across, when doing your research on it? I am still considering...
Standard halogen headlamps product very little blue light, it's all concentrated into the red, orange, yellow spectrum (about 3200°k), with only a few % of the light just entering the bottom edge of the blue spectrum above 4600°k. Halogen...
Nowadays I would say I don't understand why French changed to standard from yellow, but my side, yes might be the anti-glare, but for me is more the blue light emission at night. I use usually an amber UVEX at night which for me makes a...
Hello All,
Is it legal to change the headlamp bulbs to yellow/amber? Assume so as I saw a BMW recently which I found much less disturbing, but then is there any place where to get them? Went on Amazon but couldn't find it and ebay not either...
Replacing the fabric on doors.
I'm doing mine at the moment on my 2004 facelift.
its not hard at all.
In fact its simple, in the end is just gluing a square.
Take the old one and grab one of those dish washer sponges and remove the old glue...