Recent content by Matt BB

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    Freelander 2 wiring plug

    Does anyone know if it goes into the main loom?
  2. M

    Freelander 2 wiring plug

    Hi wondering if anyone can help, 2007 freelander 2 alternator. The little single wire plug on top? Managed to pull it out and can’t see for the life of me where it goes to reconnect. Matt
  3. M

    FL1 TD4 cranking for ages before start

    Ok Will have a look for leaks, in theory though my readings are ok then for the hp pump? I did think glow plugs but was always told they don’t really do a lot anyway
  4. M

    FL1 TD4 cranking for ages before start

    Right….. Got some readings here if they help. Without engine running (just lp pump priming the low supply was 49psi) while cranking the lp supply stayed at 49psi the high pressure rail was at 6000psi once started and running the lp is the same (a touch higher at 51) the high pressure rail is...
  5. M

    FL1 TD4 cranking for ages before start

    Haha that reminds me actually, my old man’s td4 pump use to leak and it went like a rocket still so your spot on there. just the one lp pump , it makes a racket but it was a cheap new one off eBay back along so I’m not sure that is the problem as I’m pretty sure it was changed to try to cure...
  6. M

    FL1 TD4 cranking for ages before start

    Will take some readings and report back. Not likely to be the pump itself nodge? Will change the o rings and see what happens. Theres no leaks anywhere it’s been left running before for ages in shed and never seen anything underneath
  7. M

    FL1 TD4 cranking for ages before start

    Hi, long story short . My gf had a freelander 1 td4 (lovely car, literally mint inside and out) we sold it on with a long crank issue (buyer aware) however we saw it up for sale and I fancied a project so I bought it back for something to do. I’ve just swapped the injectors for 4 tested ones...
  8. M

    Freelander 2 sat nav

    Thankyou mate, disc on order :)
  9. M

    Freelander 2 sat nav

    Morning guys, we swapped our freelander 2 for a higher spec one last night. Only the sat nav button on screen doesn’t work. is this due to no cd? Does it require one to run? Or is it knackered. Matt
  10. M

    2004 td4 clutch woes

    I will give that a go, I had heard that the master doesn’t push in far enough but what’s thrown me off is all I’ve ever done before was 500ml bottle of coke half full with fluid and a bit of tube and about 10 pushes of the peddle and jobs a good-en
  11. M

    2004 td4 clutch woes

    I’m certain it is but I just don’t know what to do about it, it’s had 3 masters. The original factory one, then a £40 eBay one, then a £60 euro parts one. Now it’s got the factory one back on because it was the best of a bad bunch. clutch plate definitely right!
  12. M

    2004 td4 clutch woes

    Brief story, replaced the clutch on a td4 2004. 3 piece kit. End result was not by into gears so replaced the master, even worse. Ok maybe it’s poorly bled so we bled it for pretty much the entire afternoon and still notchy into gears, decided to buy a reverse bleeder. Even worse Decided...
  13. M

    Freelander 1 vibration

    I’ll Chuck the front tyres on back and see if it changes anything. All the tyres are continental and all worn exactly the same, it’s not vcu and soon as you put foot down the vibration goes, if it was vcu it wouldn’t make any difference I don’t think. maybe give the cv and wobble and see...
  14. M

    Freelander 1 vibration

    Thankyou fir your reply, would vcu issue not be the same for both left and right? There’s no tying up either on full lock so I’m pretty sure vcu is fine. cv is a good shout , proper weird one it’s got to be said, don’t cvs usually click on lock if knackered
Back
Top