Recent content by Margarete

Thanks, That helps a lot. I understood now that I was way off with my guess to create a spacer starting with 10 mm in order to grind it down on a millingmachine to probably between 5-7mm. There is way less necessary to increase the ability to use the hand lever without loosing the fuel pump...

Is there any way to erase a typo once i posted somthing ?

I will check as soon as possible about the correct mounting of the pump but so far I doupt that I put it in the wrong way since I did it several times in diffrent positions of the camshaft to figure out what the problem is. Fuel pipes are fefinately correct. I even checked the vacuum with a...

Thank you for the fast response. Like I wrote after turning the engine / camshaft from the lowest to the highest point and every position between, there was no way to bring the fuelpump to work by hand ( mounted without my spacer). Is there any way to mount the pump in a wrong position since...

Hallo together Just registrated and already a question. I just can't bleed the fuelsystem with the small lever at the fuelpump when the pump is mounted. The lever just feels loose when I try. no matter if I turn the excenter of the camshaft from topend to down end. The same with a new fuel pump...