Recent content by MAF Diver

How did it go in the end? Did you manage without removing the bumper? I suspect I've got the same issue and need to replace DNE100050

Thanks guys! Do you think mine looks bad? I’ve seen this stuff, won’t it just clog the system up? Anyone used it successfully on ACE weeps? ARBs? I like ACE, seems to work well!

This is what I feared How do I know if it’s bad enough to do this? I saw other threads where people report this and get advised to leave it

So I think I've spotted two issues with my Discovery 2 ACE: 1. There seems to be a PAS fluid leak somewhere from the actuator. Can I fix this with new seals or does the whole unit have to go? 2. Bushing of the actuator is buggered? Is this easy to replace? Here's how it looks. What's your...

I cleaned it off and then filmed it fresh. It drips onto the front diff and oil filter, and seems to pool under an aluminum surface higher up. I've tried to show those locations in this video (my coolant is blue): Looking from the engine bay downwards, I can't see anything. It's got a new...

Give it a nice tug. Play in which direction? What's acceptable wear on the bushes? Anything else? I'm asking because I sometimes get a clunk from the back somewhere and trying to rule things out

Keeps melting/drying up actually!

I've got a vacuum leak from the brake booster connector on the intake manifold: (I've put another video of the leak at the end) Question: I'm debating whether to replace the whole assembly or just the red bit. Is it easy to get just the red bit out? It's cheaper to just buy this LR052965...

I'm considering this "best 4x4 mod" from another forum, it's basically a slight PCV valve relocation on the Discovery 2a What could potential downsides of it be? Unintended consequences? Essentially you're moving the PCV valve higher up, closer to the intake manifold, so oil would be...

Here's how much it moves in park and handbrake: I often hear a loud clank when abruptly giving gas or abruptly taking the foot off after accelerating/being at inclines. Probably from that play, right? Specs of note: - About a 10mm lift above factory in the front, and about 20-25mm lift in...

I’m planning on doing my head lining in the next few weeks as it’s sagging V8 Discovery 2a HSE with two sunroofs I’m gonna also add cheap AliExpress sound deadening to the roof to help with wind noise and potentially the Australian sun What else should I replace when I’ve got it off? A)...

Thanks! It has to have some kind of PCV valve inside it though: to stop oil/air going the wrong way

There's this handy guide on a PCV valve mod for the Discovery II on another forum with tons of part numbers. I googled each one of them and looked for online stores that ship to Australia. They're all in the US and most don't ship to Australia. It's a $5 part, but the ones that do, it'd come...

Thanks for sharing, what kind of oil leaks do you imagine this causing?

So I did everything, tried: - UK - Sweden - Norway - US - Unknown And also: 1) writing new settings 2) powering down nanocom, unplugging 3) removing key for 60 seconds 4) powering car back on and trying Also the first two settings are exactly the same: driver vs. all — I get the same...