Recent content by Mad McNiff
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Thanks for the info I'll try to get my head round it;
One of the pipes goes from the center top of the engine behind the fan to the connection just under the EGR valve. The other one goes to a T piece at the rear of the engine from the bottom of the radiator.
I forgot to say its the 2.7 TDV6...
-
Hello all
If like me, Easter is dealing with you RR then I thought it would be a good time for me to ask for help from the wealth of knowledge on here.
I was taking some cooling pipes of the engine ( more later ) when i noticed both of these connectors where not in use and reconnected them...
-
All
Just to close out the above problems as it is now solved.
A the real time fault suggested it was the sensor. It did come back as did the suspension faults etc.
I redid a diagnostic scan and found the common thread running through all the modules was the wheel sensor.
I replaced it with a...
-
Hello All
Just a quick update.
I did a real time diagnosis o the wheel speed sensors and found the rear right to be defective.
I pulled it out and found some rusty detritus to be stuck to the sensor. I cleaned this off and put some contact cleaner on it. I also separated the plug and did the...
-
OK.
I'll get the misses to drive it while I have it plugged in to the diagnostic machine and see what comes up.
The Radio has now gone dead after I left it out in the rain last night. It used to just have no sound but now it just doesn't come on, this looks like it could be a water leak problem...
-
Thanks for the information. I take it it has to be driven when doing it?
Thanks
Gary
-
Hi all
I have finally got round to doing the tests that gstuart told me to carry out.
The results for the Ohms tests 6->14 = 60.6
3->11 =44.4
As for the Voltage tests they were as follows 6->4 =1.68V...
-
Yes set it to DC. I'll have another go with another meter to see if that's the problem. Might be operator error
-
Just a quick.update.
Due to.a family.crisis I didn't get much done on the weekend but I had a quick go at the voltage. I think there is something wrong with the way I did it as they all read 0.
I will have a go during the week/weekend once I get everything sorted and I will let you know the...
-
Thanks again for the help. I'll got through it as you've instructed and let you know the results.
-
Thanks again for the brilliant information this will enable me to move forward.
I will have a go at the weekend as I need the car for work at the minute and my evenings will be spent welding up my van to enable this to be done.
Once I've done the tests I will let you know the results.
I...
-
I'm still working through the above information but I thought I would give a quick update.
I scanned the car before doing the master reset and got the following codes:
P0500 Speed sensor malfunction
C10100 lost communication with ECM/PCM
C1A00 Control Module
C1A93 Rear Right wheel speed sensor...
-
You are indeed right. I checked in the garage were I keep the original plates and it is indeed a 2005 model.
That's the problem with a private plate you can forget what year they are.( well I canal si have other projects on the go bit this is the everyday car.
Thanks again for your replies and...
-
-
Sorry I forgot to say that that the RRS is definitley a 2002 model and it doesn't have a sunroof so no problem with the leak issue in that location.