lynall's latest activity

Water pump runs off different belt so most likely not changed.

Diesels totally different, especially 200tdi, real bugger wen it is cold, and you are going to get the cold harder than most of us.

No sorry no idea, but like most things there will be a work around. USB boroscope might be worth a play?

Hi mate Funny anough I had to look up what a joggler was , lol https://www.machinemart.co.uk/p/edge-setterjoggler-with-hole-punch/ Indeed bet that’s fun trying to do it manually particularly if the metal is quite thick Hope ur good mate

Series stat top onto tdi stat housing.

Throttle, defender cable cut down and home made bracket, been on there for the best part of 15 years now.

Trust me it wears thin after a while.

No it was a manual plier type thing, tried it once and once realised how crap it was have never used it since.

I got most of my info from Glen Anderson who had posted on terri ann land rover page, which is a goldmine of info. Here is link to Glens conversion, Iirc his is a 109 which is why he used the defender manifolds...

Have you drilled the flywheel housing for the bottom 2 or 4 bolts? Exhaust I made my own, but think Steve parker used to do a kit. Rad I used the original s2 one, mine is the early narrow type and keeps it cool just fine. I did fit the...

You could put a tap in one of the coolant lines, most are 15mm id, which is what most UK houses run for hot and cold water circuits, so shoudl be a cheap/easy job. But I would check the cooling diagram schematics first in case the heater circuit...

Most people with the GAP tool will be vin locked to their vehicle, you can add extra vins for 60 odd quid each.

I would do what is easiest/quickest, less cut out the better for the car. How are you joggling the steel sheet? I ask as I bought a joggler (cheap one) and it is bloody rubbish.

Still sounds to me like you are low on gas, enough to make it work but not enough to be good, are they accounting for the extra gas for the rear a/c when they gas it up? Could be the expansion valve if that is its proper name? I had a d2 with...

If you pull the EPB when moving and not in bedding in mode the car will apply the service brakes with the abs pump to stop the car as well.

Quite a few cross over size wise, not perfect but good enough to get you out of a pickle.

Worth keeping for a Landy as you never know where Land Rover have used odd size fixings!

Not to bad so far inner cills in excellent condition cut off some, back half not so good rot to back of inner last foot and under wheel arch liner quite difficult, without burning paint on wheel arch, centre stiffener pushed in 10mm with...

Is the a/c compressor running? not the belt spinning but the centre of the a/c pulley spinning. Most a/c is pretty simple, pressure switch sees pressure and allows the relay to send power to the a/c compressor, so a quick test would be to see if...

Gonna be cold all the time. They all have the turning circle of a super tanker.

Hi mate mot inspector going to go over your D3 tomorrow, going to check brakes, for corrosion and leaks as per proper mot, but am pretty sure their ok, but could be proven wrong, will see, will also check for welding, myself can have a look over...

Well you are in for a treat!