Recent content by Luke662

where have all my posts gone?

So got the heating out, changed the wind screen wash tank. Made a little bracket up for it out of some ally sheet. Other tank had duff pump so another was put in line so was horrible. Pretty chuffed with it. :)

All up top chap :)

It's my daily driver so nothing extreme. I need to keep it usable on the roads. Theres a few reasons for shifting the battery to where the heating is. My battery storage under passenger seat is rotting with rust. I plan to do away with the whole under seat section and put a combo of ally and...

Thanks John that's a good shout on the seal. The other day I bypassed the heater matrix system by swapping some pipes about. I wanted to see if it had any sort of detriment to cooling before I ripped it all out. I've torn it round a farm solid for about 45 mins with no issue but also used it...

The foot wells are all good. They have been re-plated at some point. Admittedly I was done when I bought the car. The previous owner pasted body filler all over the bulk head and then painted it. So it looks all good up top. the foot wells having been changed I thought “ah cool it’s all been...

Over the weekend i continued to try and get the dash out and take apart the front left of the car. So much rust. so much filler... I'm in the process of removing the heater matrix and such. I want to use the space for other things. the car is currently covered with gaffa tape where any holes...

here a picture of the seats I fitted. They still slide back and forth and recline both ways. (the yaris was a 3 door)

The seats i have swapped out for a set from a Toyota Yaris. They are much comfier and as luck would have it were an almost direct fit. I just cut some locating pins off and had a mate weld some bars to the bottom to allow me to bolt them down. I used all existing holes. They sit about an inch...

the doors are a mess and need replacing to be honest. I've patched up the rear to a safe level. The pics dont show it but i have since fitted sound deadening to the rear door and plan to expandy foam fill it and put a flat sheet of acrilic over it on the inside. The outside will get either ally...

The wheels it came with were pretty old and i wasnt over keen ont he grip they provided so i swapped those to a set i picked up off my mate who wanted alloys on his. I prefer steels...

Here it is. It's standard apart from a Oil Catch can i fitted to it the other week. (Oh hot damn the air filter was filled with oil) I'll post up a few more pics later. They are scattered across different phones and PC's at the moment. Security issomething im looking at. Though over night...

I've been picturing the Land rover since I got it so I could keep a track of all of the bits and pieces I do to it. I'll post them in here so people can see how, what and why i did whatever i get up to. Pictures to follow...

Hello All, I recently picked up my first landy. its a 90 200tdi rust bucket but it's my bucket :) I've got lots of ideas of things id like to do to it and questions about the best way to go about implementing them. Thanks in advance for the help.