Recent content by Locko

hi map won’t work ... what were you trying to show me?

Does anyone know of a mobile landrover specialist in the Cheshire area that could come and have a look?

unfortunately I don’t know anyone else with a TD5

hi, Sorry my bad explanation The cable is 2 pair cable shielded with a foil and then stranded outer shield ,which I soldered to pin 16

I used some foil shielded twin core cable... does it need to be twisted pair?

It’s driving me round the bend!!!! Im going to sell it .... any offers?

hi thanks for your reply. yes I replaced the starter after the flood. I connected screen to pin16 on the red ECU plug and sensor to pins 13 and 36 and have also tried swapping the sensor wires around?

I will try bump starting and let you know

I have replaced the starter for brand new one after reading that it can cause interference... it made no difference at all.

They could be but the ECU will not fire them... they have been manually actuated on the diagnostic machine

Yes https://www.landyzone.co.uk/land-rover/defender-td5-ecu-issue.352819/#post-4718967

no I’m totally out of ideas now

hi, I have replaced the sensor twice, once with a cheap on and now I have a OEM one... new connector and screened cable running direct into the back of the red plug. i drove into water but stopped the engine when the water came into the footwell. runs fine on easy start with no nasty noises...

Hi, Thanks for your reply... I removed the glow plugs before attempting to start it but there was only water in cylinder number 1. I get crank sensor noisey?

I need some help please?