Recent content by liam_italian
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Well it’s been a while but I’ve finally started
Dig the chassis out from under its cover today and gave it a good clean and wipe down with panel wipe. Then it was out with the T wash and hose pipe.
Just got to wait a few days now for it to dry fully before etch primer and paint. Once that’s...
-
There is a guy over on Facebook (I know your not it's biggest fan lol) who makes repair panels for series land rovers. He has lots of pictures of his work including the jigs etc he's made to make all the pressings etc, it would be worth your while to have a look at it.
Here are a few of the...
-
I think you'll also need to sandwich the rest of the sheet of metal between two pieces of wood to stop it distorting when your pressing the vent into the metal.
You could also cut away the excess metal from the vent area which should make it a bit easier to press the vent area.
-
Well not a lot has happened since I last posted here, the Land Rover is mostly stripped down now and ready for rebuild.
However my new Richards chassis did arrive last Friday after a few teething problems with the chassis. I had originally intended to repair the current chassis but it's had so...
-
I suspect it's due to the amount of people who are on facebook, especially those who follow land rover associated groups.
Most people are on facebook so it's easier to spread the word I suspect.
-
A guy over on facebook who goes by the name "The Welding Wood" produces this part
https://www.facebook.com/TheWeldingWood/
-
-
Fair play that is brilliant bit of work you've done there, very impressive
-
the tyres are 16 x 7.50 so poss they are SWB rims then?
-
I'm not sure, how can you tell the difference between SWB and LWB rims?
-
Well finally cleared enough space in the workshop to get ready for the strip down, just need to make the time now.
-
There is some serious welding work on the chassis but unfortunately a new chassis doesn't fit into my budget so I'll just have to work a miracle
-
How much of the paint did you buy? Was 2.5L enough for 2 coats?
-
Really like the finish on that chassis paint, looking great.
-
Well after what feels like forever searching for a project I've finally got myself a Series 3 88" landy, and the best part about it all is it didn't cost me a penny :)
I was lucky enough to stumble across my Landy just down the road from where I live, the chap who owned it before me only used...