Recent content by Leewhite

All done used a densimet drill bit to get the old bolt out, finished with a carbide drill and helicoiled to an m12 all good now. Thanks

Iv got some carbide drill bits and some cobalt ones now and some cutting fluid so should hopefully come out. Im gonna have to re tap it maybe to an m10 or m12 if this does not work ill just have to nut an bolt it? Will that be ok?

Brilliant cheers for the advice ill get cracked on tonight.

What if i cant get drill it? Whats my next move?

Right thanks for that mate thats all i needed to know.

Right then iv sheered one of the main caliper bolts on the caliper mounting. Iv got the caliper off but its sheered flush with the mounting bracket. All i need to know is can you buy the mount or is it part of the axle? Iv tried all things drilling etc and its just fubared.

Took all the wheels off tonight and i cant see nothing obvious at all. All though there is grinding noise now especially when i brake and turn right.

Yeah, all bolts in place etc

As far as im aware yes and i had a mechanic check it over too. No ABS

Yeah i can rotate all of them easily.

I was driving down the dual carriageway, at about 55mph and out of nowhere front end locked up. Skidded to stop it felt like a tyre had gone, got out to check them and they where fine. I set off with a bit off juddering and it felt like it free'd off but with like a whining/humming noise all the...

Brilliant cheers mate ill put them on then!

Would the standard shocks not handle two inch springs? Got a snapped coil and a two inch lift sat about so thought about putting them on? Thanks

Ok great and yeah ill try that mate cheers

Finally haha!