Recent content by landyrestored

hey all got another problem today, stupid but is is puzzling me to death the chequer side skirts how are they mounted the lip seems to be stopping me from fitting them to my vehicle, can they be fitted with door runners on or do they have to be taken out

Yeah friend told me id have to change the servo if i change to later cylinder? Mine a 91 h reg

Ill need a different servo then to match it wouldnt i?

Its leaking past the master cylinder so will get a kit ordered and overall it. Having problems with lights again now just indicators, when i signal left all left side come on and so do the right. Iv check all wires i have none crossed and all earths are fine could anyone shine some light?

Yeah i pressure bleed mine mate i dont think its a air fault going to do a test in the morning, but me money is on the slave cylinder

Disk mate its had the conversion

Ill give this a try in the morning i dont think there is air in the system as i pressure bleed it had got alot of air out, the brakes go solid after a few pumps but travel all the way to the floor i think the problem lies within the servo or cylinder or both haha , il do your test in the morning...

Got light now mate Got a new problem now just went to turn the vehicle around and the brakes where spongy but after few pumps they went hard then back spongy again i thought i had a problem air a air lock so i rebleed it and still the same but cant determine wether its the servo side or the...

Cheers ian thanks for clarifying that for me tow bar also loops from o/s/r?

Checked all earths and they are fine, i think i have figured it out but not tested it yet. But here is my theory. Iv fitted new chassis loom as mine was in a terrible state so fitted the loom wired the o/s up and then wired the n/s and found there was more bullet connectors on the o/s with same...

Any further news on this mate?

Have checked the earths all look in order. Will visually check the wiring for damage first thing in the morning

hey all i could do with some help and take abit of your knowlege, im on the end of my rebuild and im tackling the electrics. So my light are working except all n/s/r and had no power there at all and as faras im aware all plugs are wired correctly any ideas? Also i have no brake lights, i have...

Thanks! Yeah i thought if im going todo it then Go all out way, dont want to have to strip down again once its done. all the pain and cuts will be worth it when shes back going. Ah right, yeah im having loads of trouble with the electrics all n/s/r do not work and i also have no brake lights...

Didnt meant to post twice still getting used to forums again