Recent content by landnurse

Leebee (correct spelling excused):D The pulling to one side question, if pulling to the righthand side (Drivers). Then take a close look at the nearside (Left) disc. Chances are with this being the kerbside of the vehicle, too much past kerbside puddle jumping the swivel hub seal has taken a...

Couple of suggestions assuming it is disc front drum rear set up; 1. Try either brake grease or copperease between the disc pad backs and the anti-squeal shims (thin smear is adequate, not a complete pasting). 2. Take the drums off the rear end and clean out any shoe dust, as this can cause...

:eek: Anybody experienced TIG welding landrover chassis? If so newbie questions thus; What size tungsten electrode? What size filler rod? What sort of point on the electrode (either short/obtuse or long/acute)?Silly questions but I've got to start somewhere, also will any of the Haynes welding...

There should be a zip file attatched to this message, (first time of trying). With seven hopefully usefull sites to explore for your headlining. good luck Landnurse

Here goes, CSW = County Station Wagon ie full of seats which usually have a cloth trim as opposed to vinyll For Defenders 90 = short wheelbase, 110 = long wheel base, 130 = even longer! any other wheel base mentioned would denote a one off or hybrid. As for Disco wheels cause they are...

accywingy, Thanx I take it here endeth lesson one?? Ye ole waste gate moveth! By the way I am now attatching rear x member with extensions.... oh what joy! Next springs and dampers, thankfully somebody else has polybushed it. Landnurse

I have a 110 2.5 diesel turbo (not TDI), fairly tidy and runs steady. What should the MPG reach as at present I can only manage 20mpg! No I'm not too heavy footed, also when driving I can hear the turbo working up to half way on the throttle then the last half of peddle movement does nothing...